Macromatic relays specify the power consumed by the device as “burden” in units of VA. Look for the burden specification in the catalog page for the specific device you have. The unit of VA(volt-amps) is essentially the same as Watts(power), current draw can be calculated in Amps by taking the VA specification and dividing by the voltage control voltage you are using to power the device.
LIQUID LEVEL CONTROL RELAYS
LCP Series Liquid Level Control Relays regulate levels of conductive liquids in pump up (fill) or pump down (drain) applications. The output of the relay controls pumps, solenoids, or valves to lower, raise or maintain the liquid level in the tank. Typical liquids include tap water, seawater, sewage, irrigation, chemical and pharmaceutical solutions, beer, coffee, and ice cream.
Precisely Raise, Lower or Maintain Conductive Fluid Levels
The probe is pulsed with DC voltage to prevent potential electroplating. An LED indicates energization status. Choose from two adjustable sensitivity ranges based on fluid. Mounting requires an industry standard 8 pin octal socket. Choose from Single Probe or Dual Probe configurations.
SINGLE PROBE
On single probe models, a fixed time delay prevents rapid cycling of the output relay and its load. Ten factory settings ranging from 1 to 60 seconds.
DUAL PROBE
Dual probe models are available with specific pin configurations to match competitive devices.
Function:
Fixed Time Delay – Seconds:
Control Voltage
Sensitivity Range:
Need it custom?
Need a custom engineered product? We offer engineering assistance and quick turnarounds on prototypes.
FILTER BY MODEL NUMBER:
SORT BY:
LCP Series
Function Output:
Single Probe Pump Down
Control Voltage:
24V AC
Fixed Time Delay:
30s
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$102.08
LCP Series
Function Output:
Single Probe Pump Down
Control Voltage:
24V AC
Fixed Time Delay:
4s
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$102.08
LCP Series
Function Output:
Single Probe Pump Down
Control Voltage:
24V AC
Fixed Time Delay:
5s
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$102.08
LCP Series
Function Output:
Single Probe Pump Down
Control Voltage:
24V AC
Fixed Time Delay:
60s
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$102.08
LCP Series
Function Output:
Dual Probe Pump Up (w/ Pin Configuration = SSAC & NCC unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 4.7K – 100K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Up (w/ Pin Configuration = SSAC & NCC unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Down (w/ Pin Configuration = SSAC & NCC unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 4.7K – 100K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Down (w/ Pin Configuration = SSAC & NCC unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Up (w/ Pin Configuration = Crouzet & Symcom unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 4.7K – 100K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Up (w/ Pin Configuration = Crouzet & Symcom unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Down (w/ Pin Configuration = Crouzet & Symcom unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 4.7K – 100K Ohms
$108.20
LCP Series
Function Output:
Dual Probe Pump Down (w/ Pin Configuration = Crouzet & Symcom unit)
Control Voltage:
24V AC
Fixed Time Delay:
Sensitivity Range:
Sensitivity Range: 1K – 250K Ohms
$108.20
Frequently Asked Questions About Liquid Level Control Relays
Actual resistivity of ligiid varies and should be calibrated once installed. Standard resistivity values for common liquids can be found here.
Macromatic maintains an extensive cross reference database. Follow the link here.
Level probes can be made from any conductive material. The head of a bolt through the sidewall or a threaded rod suspended from above are often used as probes with wires attached using ring terminals.
Liquid Level Control Relays Downloads
Knowledge Base Articles
Technical reports to answer your questions
Need Answers? Look Here.
NEED A CUSTOM ENGINEERED PRODUCT
We offer engineering assistance for you unique applications, quick turnarounds on prototypes, and the best technical support in the industry
LOCATE A DISTRIBUTOR
If you have a need for a small quantity, our Authorized Distributors have many of our products in stock, ready for immediate shipment. They can answer any questions you may have.
